Magnetism and Mysticism

The Pedvale Open Air Art Museum lies in a magnetic field. The magnetic force lines of this field interact with the large granite and iron sculptures to create some unusual magnetic effects. The lifting ring

This is the cast iron ring.  The bolts run through the base, then through  an oval hole in the upper arms, then directly into the stone.

This is the cast iron ring. The bolts run through the base, then through an oval hole in the upper arms, then directly into the stone.

on my sculpture, Sekimori Ishi
Sekimori Ishi

Sekimori Ishi

attracts the north pole of a magnetic compass. On the other side of the park, Carl Billingsley’s sculpture Iron Lightning click for photo of Iron Lightning (Dzelzs zibens) attracts the opposite south pole. In essence, these two sculptures form a large magnet in the park. Other sculptures in the park are similarly magnetized.

Advertisements

Tannate Patination of Iron

Tannic acid patination is an ancient technique for forming a dark protective coating on iron objects. It may have been discovered accidentally, after iron objects were lost or buried in peat bogs, then recovered later in an unrusted condition. Iron Age bog bodies have been found with intact iron blades, more than a thousand years old. (reference for iron preservation in bogs)

The process itself is simple and non-toxic. Before starting, be sure that your object is clean, free of grease and oil, and lightly rusted. Japanese swordsmiths would boil their iron Tsuba in wood ashes (lye), then wash them in vinegar, and toast them over a Hibachi to rust. Place the object in a container, and cover it with bark pieces. Add water or vinegar to cover the object and the bark. This should then be allowed to sit for several weeks, to develop the coating. Ideally, the water should be free of chloride, so water that has passed through most water softeners is not acceptable. Distilled or de-ionized water will work well.  You can use rain water, but some rain water contains a small amount of chloride, which you want to avoid. If you have a municipal water supply, they may be able to tell you the chloride content of your water.  (analysis of Grand Rapids, Michigan water)

As with any chemical process, heat will speed up the reaction. Small objects can be boiled with bark, or the container can be put outdoors in a sunny location, depending on the climate and weather. click here to see a small iron sculpture, which was processed by heating with bark and water in a slow cooker The tsuba on Japanese swords were traditionally boiled in pomegranate peels to darken the iron. patination of iron tsuba

Lowering the pH of the solution with an acid will also speed up the process, but do not use muriatic acid, which is hydrochloric acid, as this adds undesirable chloride ions. Chloride will lead to destructive corrosion of the iron. An organic acid, like vinegar, will work. Phosphoric acid is found in some rust removers. This may add a blueish cast to the patina.

I have fermented the residue from jelly making, which contains some sugars and organic acids. This will form some alcohol, which can be further fermented to acetic acid. Strain out the liquid, and add it to the bark. The resulting solution was quite dark, probably due to some water soluble plant pigments.

Large objects can be painted with a solution, as recommended by the Canadian Conservation Institute. CCI bulletin

MATERIALS LIST

1. WATER You need water with as little chloride as possible. If you can, use distilled or de-ionized water. Rain water may be acceptable. Do not use water from a water softener that uses salt.

2. TANNIC ACID This is actually a mixture of organic compounds. You can buy tannic acid. Tannic acid is contained in tree bark, tea, hops, sumac fruits, black walnut or pecan hulls, and pomegranate peels. You can leave these in the solution while the patina develops. They will eventually have to be replaced. Any hardwood or softwood bark will work, but oak or cherry are particularly nice. Solutions of cherry bark may be toxic. Bark mulch from a garden supply place is sufficient. Logwood contains tannins, and may be available where supplies for trappers are sold.

3. PHOSPHORIC ACID You can buy this on Amazon, or maybe in a local drug store. Coca Cola and other soft drinks may contain phosphoric acid.

4. Other ACIDS Ideally, your solution should have a ph of 2. Distilled white vinegar works. Avoid muriatic acid, which is hydrochloric acid.

5. Homemade vinegar. Anything with sugar can ferment to alcohol, which can be further fermented to vinegar. If this does not occur spontaneously, see if you can get organic vinegar which contains “mother of vinegar” to add to the solution. Try fermenting fruit pulp or peels, beets, carrots, molasses, or anything else that you can find containing sugar. Fruits usually contain other useful organic acids as well. Since you are not going to eat or drink this, spoiled or rotten fruit is fine. Add yeast, and let sit a week or so before straining for use. Allow room for expansion.

6. If you have access to a silo, the drainage contains organic acids, and often alcohol as well. This can be used as the liquid in your patina solution.

7.Alcohol. Alcohol acts as a solvent, and helps the solution to penetrate cracks and porosities in the cast iron. It isn’t strictly necessary, particularly if you are fermenting fruits to produce the material.

What is the meaning of Seshimori Ishi ?

My sculpture was based on the traditional Japanese sekimori ishi. Here is a photo of one in use in a Japanese garden.

Sekimori ishi at the Chicago Botanic Gardens

Sekimori ishi at the Chicago Botanic Gardens


I am interested in visual symbols, particularly ones that may convey multiple meanings.

Sekimori ishi means boundary guard stone. It tells you that a path is closed, but also provdes a convenient handle for moving the stone, so that you can ignore the message. It is not a “Keep Out” sign, but is more of a polite suggestion. The tea master Rikyu is said to have used it as a metaphor for “stay on the right path in life”.

This is a symbol that contains its opposite, much like Nabuo Sekine’s Mono Ha sculpture, Phase-Mother Earth at Suma Rikyu Park.

Phase-Mother Earth, reborn

http://www.nobuosekine.com/image/phase-mother-earth-1968/

The idea behind the sculpture was to include multiple opposites, in addition to this implied restriction and permission of the object itself. The boulder is natural and unworked, while the iron is man made and cast. The upright stone is male, but the rounded form with the ring is female. The boulder is positive space, the iron encloses negative space. Yin and yang. Hot iron and cold stone.

The design of the iron is based on my youth in Pittsburgh. This engraving shows my neighborhood a century before I was born. I grew up playing on coal mine dumps, and there were coal mines under my neighborhood. I got to see lots of early ironwork, some of it in the form of machinery that still worked for decades. My neighborhood was on the third hill from the river.

my nieghborhood, 1850

my neighborhood, 1850

You can view this sculpture as my desire for you to stay on the right path. As it mimics the aesthetics of 19th and early 20th century iron, it can also mean that you should avoid the excesses of 19th century industrialization and capitalism, or not, as you wish.

Other Interpretations

Other viewers have other ideas of what the sculpture means. Possibly due to Mylie Cyrus, some view it as a wrecking ball. I deny this, and the design was started before her video. On the other hand, if you make a wrecking ball video or photo using this sculpture, please send me a copy.

wrecking ball by DonkeyHotey

Several people have seen this as a kraken, devouring the rock. Although octopi have eight tentacles, and squid have ten, I can see this visually.

kraken tattoo design by Iryne R

Uther people have suggested that this looks like an ancient anchor. Anchors are a traditional symbol of hope, so I enjoyed this idea. After the sculpture was made, I found this large buoy anchor in Latvia.

anchor

Carol Johnson has written that this reminds her of a bell. I have cast bells, although they have been much smaller than this. I would not want to try to ring it. What is the sound of one boulder ringing?

my lost bubble wrap bell

Making Sekimori Ishi at Pedvale

My plans changed a bit from the initial proposal, which was to cast iron directly around the granite.  See my previous post about cultural resource management, and choosing the stone.   I could not have completed this sculpture without the help of my assistants, Sutton Demlong and Justin Playl.  Both were highly recommended by Tamsie Ringler.

Me, the raw stone, Sutton Demlong, Justin Playl

Me, the raw stone, Sutton Demlong, Justin Playl

Continue reading

Design of Sekimori Ishi for Pedvale

This is a design for Sekimori Ishi, to allow construction on-site at Pedvale. The sculpture consists of an unmodified granite boulder, about 4 feet tall, (1.2 meters) and 5 cast iron pieces which are bolted together. This will be permanently sited outdoors at Pedvale Open Air Museum. The proposed sculpture is an iron and granite representation of a sekimori-ishi, which is a feature of many Japanese gardens.. This sculpture was inspired by Nabuo Sekine and the Mono Ha movement. Mono Ha is a Japanese art movement related to Land Art, which encouraged the production of objects, usually of natural materials. If you grow up in Pittsburgh, cast iron is a natural material.

 

The sculpture is based on the traditional sekimori ishi, as used in Japanese gardens. The term means “boundary guard stone”. As shown below, this is a small boulder, tied with garden twine, which forms a handle. Sometimes, this is a metaphorical warning to “stay on the right path”. At other times, it refers to a danger or unpleasantness along that branch of the path. It can also be a request for privacy. This is a polite request, that can be easily ignored by stepping over the stone or moving it.

Sekimori ishi at Chicago Botanic Gardens

Sekimori ishi at the Chicago Botanic Gardens

This is the original maquette, solid aluminum cast in one piece around a granite stone. The full size sculpture will mimic this visually, but the “arms” will be hollow, and will not join at the bottom of the stone. The “ring” has been slightly modified, and rotated 45 degrees. It should appear possible to pick up the sculpture with the lifting ring on the top, but it will actually be lifted with a sling, and the iron pieces are not actually used for lifting. The idea is to give the Japanese symbol the style of 19th century industrial iron. This could be interpreted as a post-industrial comment on the abuses of 19th century industrialization.
granite and aluminum

The arms will be made at Pedvale from gray cast iron. They will have an open rectangular cross section, with the open end facing the boulder, which is approximately 4 foot tall. (1.2 meters).
Dimensions of the arms are D=6 inches (15 cm), B= 3 inches (7.5 cm) t=1/2 to 5/8 inches (1 to 2 cm), depending on material available to make the casting patterns.

cross section of arms

cross section of arms

There are 4 arms, at right angles to each other. For identification, label them north, east, south, and west, like a compass. They do not need to be oriented to the compass direction when the sculpture is sited.
compass

The arms will be curved to fit the boulder, and have squared-off ends. They will be bolted to the boulder through a hole in each end. The bolts, made of threaded steel rod, will be anchored in the boulder using a commercial, long set up time epoxy.

Arm

Arm

The lifting ring has been re-designed to have a round, 12 inch diameter circular hole. (20 cm in diameter). This should be large enough, so that viewers can not get their heads stuck in the sculpture.

Top Ring

top ring

The ring will be cast in one piece with a cross shaped plate at right angles to the ring, with a square piece between them.

bottom

bottom of lifting ring piece.


6 inch (15cm) square middle layer

square middle layer of lifting ring

The plate will be bolted to the 4 arms with 1/2 inch diameter threaded rod,or a metric equivalent. This will pass through the upper end of the arm, then the cross shaped part of the lifting ring, them into an epoxy-filled hole in the boulder. Loc-tite or something similar will be used to prevent the nuts from being removed.

assembly of arm and lifting piece.

assembly of arm to lifting ring piece

The arms will slide over the protruding ends of the cross shaped lower piece of the ring assembly, in a mortise and tennon joint. There are two threaded rods holding each arm, one at each end. The rods are placed and set in epoxy after the lifting ring and the arms are placed and fitted to the boulder.

assembly

assembly

As the arms do not actually cross at the bottom, the first few inches of the sculpture will be buried in gravel, to hide the lower end. This should make it appear that the arms cross under the boulder. If possible, I would like to use very small crushed limestone, and ram it into place. This may be mixed with local clay, if it is available. I have see lime-clay-flint foundations over 1000 years old in Winchester, England.

DSCN1788

As a final addition, I would like to bolt a large piece of cast aluminum to at least one of the lower arm ends to act as a sacrificial anode. This can be any locally acquired scrap aluminum. Since aluminum is more reactive than iron, this will corrode in preference to the iron. This technique has been used to protect street railway rails, plumbing, and marine vessel hardware. I might cast these pieces at home, before the conference.
http://chemwiki.ucdavis.edu/Analytical_Chemistry/Electrochemistry/Case_Studies/Corrosion/Sacrificial_Anode